Scion iM Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
33 Posts
Discussion Starter · #1 ·
Hello, there...

I received my fog light kit I got off eBay today, and it has a red wire to tap into a power source. I want it to go into the ignition power so that they cannot be powered on unless the engine is running. Which wire do I need to tap into? Thanks!
 

·
Registered
Joined
·
3 Posts
I did mine like a year ago I think is the blue wire on the driver side about the fuse box by the tweeter I’ll try to post a picture later on I’ll recommend adding a fuse after the wire tap to protect the fog light and to make sure your install is save
 

·
Registered
Joined
·
1 Posts
I did mine like a year ago I think is the blue wire on the driver side about the fuse box by the tweeter I’ll try to post a picture later on I’ll recommend adding a fuse after the wire tap to protect the fog light and to make sure your install is save
Thank you for this, the european car workshop that I went to seems to be clueless on this.
 

·
Registered
Joined
·
3 Posts
Hello, there...

I received my fog light kit I got off eBay today, and it has a red wire to tap into a power source. I want it to go into the ignition power so that they cannot be powered on unless the engine is running. Which wire do I need to tap into? Thanks!
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top