Scion iM Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter · #1 ·
I put in new headlights, but on the driver side, the projector moved someway somehow and now it's aimed at the ground. The passenger side is fine, but I can't seem to fix the wrong one bc I don't even know how it moved! I've been fiddling with it and it doesn't noticeably move but it did go from aiming directly at the ground to a little bit further up. It's not equal though. Anyone know how to do it, I have to drive home tonight and don't want to be blinded on one side.
 

·
Registered
Joined
·
7 Posts
Discussion Starter · #2 ·
So I know how to aim the projector now, you use a screw driver to turn the white screw above the headlights. But my projector keeps falling back down. Any ideas?
 

·
Registered
Joined
·
196 Posts
So I know how to aim the projector now, you use a screw driver to turn the white screw above the headlights. But my projector keeps falling back down. Any ideas?
Remove and Re-insrall the new bulb. There is a good chance that the bulb did not seat properly when it was installed.
 
1 - 3 of 3 Posts
Top