Scion iM Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
15 Posts
Discussion Starter · #1 · (Edited)
Part # is CSB1408 and the car is a 6 speed :).

Took about 1 hour to remove wiper cowl, install spacer and bar and then put everything back together.

The only mod was bending one of the tabs on the driver side metal bracket used for the harness, it's barely noticeable.

hxxps://imgur.com/download/DAzb9OX
^^ change xx to tt
The bar made a noticeable difference imo but there's more to be done......
 

·
Registered
Joined
·
1,288 Posts
Part # is CSB1408 and the car is a 6 speed :).

Took about 1 hour to remove wiper cowl, install spacer and bar and then put everything back together.

The only mod was bending one of the tabs on the driver side metal bracket used for the harness, it's barely noticeable.

hxxps://imgur.com/download/DAzb9OX
^^ change xx to tt
The bar made a noticeable difference imo but there's more to be done......
Yup, several folks have done it. I personally went with the Tanabe, easier to install.

If you want to really tighten things up, look at this guys stuff

Products
 
1 - 4 of 4 Posts
Top