Scion iM Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
42 Posts
Discussion Starter · #1 ·
Hey

I am eventually going to do a full system in the car, have the amp, components, wiring, just need a processor and will fibreglass a sub box, but was curious what was behind the sail panel currently and if they will fit my Hertz tweeter when I put them in.

Here is a pic for those curious:



Thanks

Aaron
 

·
Registered
Joined
·
331 Posts
Are you using the OEM headunit with a sound processor? Have you found a pin out for the OEM wiring harness anywhere?
 

·
Registered
Joined
·
42 Posts
Discussion Starter · #4 ·
Hey

Will probably use an Audiocontrol DQ61 with speaker level inputs. By the looks of the back of the head unit (thanks to you) the regular Metra Toyota 70-1761 should work.

Probably start the system in a month or two and will do a full write up.

Thanks

Aaron
 

·
Registered
Joined
·
331 Posts
Looking forward to seeing what you come up with! Good luck, and post updates. I'm very curious to see where / how you mount the sub.
 

·
Registered
Joined
·
363 Posts
Any plans to add sound proofing? I think in a vehicle like this it will go a long way in imporving sound quality due to how they are built and the sort of things they lack too.

Dynamat FTW.
 

·
Registered
Joined
·
42 Posts
Discussion Starter · #7 ·
Hey

Going to use 2 rolls of Focal BAM XXXL. They say that one role will cover 4 doors. With two rolls I should be able to do inner and out door skins on all door, rear quarter panels, space tire well and hatch door.

Should be a fun projects. I glassed 2 10's in my tacoma a couple years ago and it looks like a single sealed low volume 10 box would fit in the passenger side of the hatch. The passenger side storage is larger than the driver side in the hatch.

Aaron
 
1 - 7 of 7 Posts
Top