Finally got the wheels, tires and springs installed
So I was finally was able to get the iM to the shop and get everything installed.
Overall I'm happy, wish the springs had more drop but that's ok. The front could also use a little camber as there is a slight poke.
Wheel specs are Rotiform TMBs in 19x8.5 in +35 offset and tires are 235/35-19 Ohtsu fp8000s. The springs are H&R Sport part# 29084-5.
Wheel to top fender arch specs:
Front before 26.5" after 26"
Rear before 27.25" after 26.5"
All around gap is two fingers.
Note: 235/35-19 are 0.50" taller than stock. Also before measurements were taken with stock tires on.
Let me know your thoughts!
Last edited by MikeD; 08-02-2016 at 02:38 PM.